PRODUCT CATEGORY

PHOTOINITITAOR 100F (CAS:)

Lotcure 100F is particularly indicated for the photopolymerisation of UV curable systems when very low curing odor and color stability are required. It is suitable for water based UV curable systems when prediluted in a water compatible solvent.

Inquire Now Next Product

PRODUCTS DESCRIPTION

Photoiniatior 100F

A Macromolecular Photoinitiator

Chemical Name

Bis[2-hydroxy-2-methyl-1-[4-(1-methylvinyl) phenyl] propanone] and 2-Hydroxy-2-methyl-1-phenyl-propan-1-one (KIP100F)ELINCS, MITI and TSCA registered

Introduction

Lotcure 100F is particularly indicated for the photopolymerisation of UV curable systems when very low curing odor and color stability are required.

It is suitable for water based UV curable systems when prediluted in a water compatible solvent.

UV absorption spectrum in MeOH

(cell thickness = 1 cm)

Applications

Clear lacquers for wood, plastic, paper, metal, optical fibers

Coatings for flooring

Adhesives, printing inks

Optimum concentration is between 0.5 and 5% by weight and depending on system composition, thickness, and desired cure-speed.

Physical Characteristics

Appearance Reddish brown sticky liquid

Purity(HPLC) >90.0%

Moisture(K.F) <0.2%

1173 Content 20.0%-25.0%

(HPLC)

Color <10Gardner

Odor Faint, characteristic

Solubility insoluble in water,

soluble in most common organic solvents, monomers

prepolymers;

compatible with resins

Toxicological information

LDo > 2000 mg/kg

Skin contact non irritant

Skin non sensitizer

sensibilizatio

Safety and handing

Store in dry and well ventilated area, keep in the dark and avoid temperature higher than 35°C.

Keep away from heat source and open flames.

Keep away from moisture.

Wear gloves and safety goggles.

GET IN TOUCH

RELATED PRODUCTS

PHOTOINITIATOR ITX

Lotcure ITX is a yellow crystalline powder compatible with unsaturated polyesters, acrylate monomers and oligomers used in UV-curable systems. It is an effective photoinitiator for clear or pigmented UV-curable inks, adhesives, coatings and photoresists.

PHOTOINITIATOR 379

2-Dimethylamino-2-(4-methyl-benzyl)-1-(4-morpholin-4-yl-phenyl)-butan-1-one Lotsorb 379 is a highly efficient UV curing agent which is used to initiate the photopolymerisation of chemically prepolymers with better solubility than Lotsorb 369. It is especially suitable for pigmented UV curable systems and printing plates

PHOTOINITIATOR CBP

Lotcure CBP is a highly effective free radical type II photoinitiator, mainly in the UV polymerization with tertiary amine, such as clear lacquer, plastic coatings, wood coatings, adhesives, offset printing ink, screen printing ink, flexo ink, and electronic products.

PHOTOINITIATOR BDK

Lotcure BDK is a highly efficient UV photoinitiator with serious yellowing performance, generally not used for varnish system. It can be used in photosensitive resins pringing. It is a yellow crystalline powder compatible with unsaturated polyesters, acrylate monomers and oligomers used in UV-curable systems.

PHOTOINITIATOR TPO-L

Lotcure TPO-L is used as an initiator for very low yellowing, white pigmented UV-lacquers, UV screen printing inks, UV offset and UV flexo inks, overprint varnishes, paper lacquers, photoresists, printing plates, stereolithography, etc.

PHOTOINITIATOR 907

Lotcure 907 is an effective photoinitiator. It can be mixed with 184 or ITX for gloss finish for paper, metal and plastic. It also can be applied in UV offset ink and electronic photo-resist and PCB material. Recommended dosage is 2-6% w/w.

PHOTOINITIATOR PBZ

Lotcure PBZ is a highly efficient solid photoinitiator which is used to initiate the UV polymerization of chemically unsaturated prepolymers in combination with tertiary amine synergists. It also can be used as the intermediate to synthesize organic pigments, pharmaceuticals and pesticides.

PHOTOINITIATOR 500

Lotcure 500 is a liquid mixture of two photoinitiators JRCure 184 and JRCure BP, which is most effective when used in acrylated UV curable systems. Specific applications include printing inks, overprint varnishes, clear coatings for paper, plastic, metal and topcoats for coating of wood and wood substitutes.

PHOTOINITIATOR 307

Lotcure 307 is used as alternative of Lotcure 907. It is sulfur-free and benzene-free structure, no Residual Odor, no emission of VOCs.

PHOTOINITITAOR 1800

Lotcure 1800 has wide light absorption pope and its maximum absorption peak are 420nm. This product has many excellent performance: High efficiency, Maneuverability, good compatibility.