p,p'-Divinyl-1,2-diphenyl-ethan

BVPE is PCB inks monomer.

PHOTOINITIATOR 784

Lotcure 784 is a reactive orange coloured solid photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to visible light or UV light. It can be used as the sole initiator or in combination with other initiators and mono or multifunctional monomers as reactive diluents. Lotcure 784 shows photobl

PHOTOINITIATOR DETX

Lotcure DETX is a highly effective photoinitiator, which is mainly used to initiate the photo polymerization of unsaturated prepolymers, and used in UV-curing coatings and inks.

PHOTOINITIATOR 907

Lotcure 907 is an effective photoinitiator. It can be mixed with 184 or ITX for gloss finish for paper, metal and plastic. It also can be applied in UV offset ink and electronic photo-resist and PCB material. Recommended dosage is 2-6% w/w.

BLUE LIGHT ABSORBER B-100(LOTSORB B-100)

​Lotosrb® B-100 is a blue light absorber with good weather resistance and strong absorption of UVA (below 400 nm), which has extremely high absorption performance in the 315-400 nm ultraviolet region. It has the advantages of high heat resistance and low volatility, and is suitable for applications that require high-temperature processing. In addition, it can also fully utilize the ultraviolet shielding effect in film applications.

BLUE LIGHT ABSOREBR B-60(LOTSORB B-60)

Lotsorb B-60 is an efficient redshift ultraviolet absorber with blue light blocking effect.It can be used in plastics, Fibers, adhesives, and coatings (especially Hard Coat). It has a strong absorption effect on light with wavelengths of 370nm-480nm.

BLUE LIGHT ABSORBER B-30(LOTSORB B-30)

Lotsorb B-30 is an efficient redshift ultraviolet absorber with blue light blocking effect. It can be used in plastics, Fibers, adhesives, and coatings (especially Hard Coat).

BLUE LIGHT ABSORBER UV 430(LOTSORB UV 430)

Lotsorb UV 430 is a is a UV blocker derived from vanillin, a renewable natural resource. It has a remarkably high absorption in the UV-A wavelength region. Therefore, at merely 750 ppm loading in 1 mm thick PET, UV 430 can block out all UV-A light up to 400 nm. In fact, UV 430 is 5 times more effective in blocking UV-A light at 400 nm than Lotsorb UV 326, a commonly used UV blocker, which indicates that UV 430 will have a low impact on the initial color.

LOTSORB UV 571

LOTSORB UV571 features low volatility and high compatibility in various substrates and readily undergoes emulsification in water-based adhesive. This product can also be used in fiber and sheet application on various polymer.

LOTSORB UV 3638

Lotsorb UV 3638 is made to dissolve quickly in PET resin and to give a transparent appearance even with high dosage. Lotsorb UV 3638 is ideal for film/sheet/plate applications such as solar cell, window film, etc. Lotsorb UV 3638 is registered on FDA and is approved for food contact applications such as PET bottles and food wrap films.

LOTSORB UV 326

Lotsorb UV 326 is especially suited for polyolefins and cold cured polyesters. UV 326 has a wide range of indirect food approvals in polyolefins. It has a low volatility at high temperatures and high resistance to thermal degradation and can therefore be used without significant loss or decomposition in the polyolefin compounding and molding processes

LOTSORB UV 312

Lotsorb UV 312 is a oxalamide-type UV absorbent for coating applications. The usage addition of Absorber-312 is between 0.10 and 1.0%, depending on the substrate and the performance requirements of the final application.

TINOSORB M

Tinosorb® M provides the broadest-possible UV protection based on micro-fine organic particle technology. The photo-stable UV filter functions in the water phase and thus combines soluble components in the oil phase.

LOTSORB UVA-PLUS

LOTSORB UVA-PLUS(Diethylamino Hydroxybenzoyl Hexyl Benzoate) is a good kind of light resistance UVA absorber.

Octocrylene (LOTSORB UV 3039)

Octocrylene is a liquid UV absorber specifically designed for the protection of epoxy resins against the damage from UV light radiation.

Ethylhexyl Triazone(UVT-150)

Chemical name: 2,4,6-Trianilino-p-(carbo-2'-ethylhexyl- 1'-oxy)- 1,3,5-triazine

Fluorescence dyes

LOTSORB IR 783(IR Absorption dye)

LOTSORB IR 775(IR Absorption dye)

LOTSORB IR 749(IR Absorption dye)

LOTSORB IR-L700 series

LOTSORB IR-L series infrared penetrating dye is widely used in applications with infrared transmittance Communication components, while helping to transmit infrared signals, can easily cover the internal structure due to their visual black color, making them widely used Infrared signal transmission or infrared window for mobile phones, computers, home appliances, cars, infrared touch screens, etc.

LIGHT STABILIZER 770

HALS 770 is a hindered amine light stabilizer (HALS) for applications demanding particularly high light stability. It provides excellent light stability for thick sections but can also be used for articles with a high surface area such as films and tapes.

LIGHT STABILIZER 783

HALS 783 is a synergistic mixture of HALS 944 and HALS 622. It is a versatile UV stabilizer with outstanding extraction resistance, low gasfading and low pigment interaction.

LIGHT STABILIZER 622

Light stabilizer 622 is the light stabilizer of choice for all applications calling for low volatility and minimal migration, because of its oligomeric structure with high molecular weight. Furthermore UV 622 is effective as antioxidant and contributes significantly to the long- term heat stability of polyolefins and tackifier resins.

LIGHT STABILIZER SEED

SEED is a new type of multi-functional nylon additive, which can not only act as a light stabilizer when added to nylon products but also improve the processing stability of nylon, especially in nylon spinning, which can significantly reduce the broken filament rate; It can also improve the heat and oxygen aging resistance of nylon products and the dyeability of products.

LOTNOX 1790(ANTIOXIDANT 1790)

Lotnox 1790 is a high performance hindered phenolic antioxidant, suited for polyurethane, polypropylene, polyester, also for other engineering plastics with high-temperature resistance.

LOTNOX HP-136 (ANTIOXIDANT HP- 136)

LOTNOX HP-136 is an effective carbon free radical scavenger, has obvious effect with phenol and phosphite antioxidant compound.

LOTNOX 1024MD(ANTIOXIDANT 1024MD)

Lotnox 1024MD is a metal deactivator and primary sterically hindered phenolic antioxidant for telecommunication wire and cable applications.

LOTNOX 412S(Antioxidant 412S)

Lotnox 412S is a sulfur containing antioxidant with high molecular weight and the characteristics of low volatility and high continuous performance, showing outstand heat-resistance and low leaching properties.

7-(Diethylamino)-4-methylcoumarin(SWN)

​Coumarin 1, also 7-(Diethylamino)-4-methylcoumarin, is potentially useful as a laser dye.

OPTICAL BRIGHTENER CBS-X

Optical Brightener CBS-X is used in whitening detergent, concentrated liquid detergent, soap,washing powder, water based coatings, also used foe fiber, nylon, wool, paper, cotton, T/ C Blends.

OPTICAL BRIGHTENER OB-1

Optical Brightener OB-1 is excellent oxazole type brightener, Mainly used in whitening of polyester and ABS, PS, HIPS, PA, PC, PP, EVA, rigid PVC etc., also used as nylon fluorescent brightener.

OPTICAL BRIGHTENER OB

​Optical Brightener OB is used as an brightener and to offset the yellowness of a polymer and yield a whiter appearance. Mainly used as thermoplastic (PVC, PS, PE, PP, ABS) optical brightener. Also for coatings, printing inks, paints, dyes, manufactured fibers, synthetic leather, waxes, fats, and oils. Recommend indoor use only.

LOTSORB HN 150

Lotsorb HN 150 is used as anti-yellowing and anti-gas fading agent for PU, TPU, Nylon, polyester powder coating. In addition, it's also to be used as light stabilizer for polyamide and heat stabilizer for polyethylene oxide system

LOTSORB HN 130

This product can be widely used in the production process of PU profiles, shoe materials, plastic and polyurethane fiber to prevent yellowing stain during the period of processing.

INHIBITOR 701

Chemical name: 4-hydroxy-2,2,6,6-tetramethylpiperidinoxyl

Inhibitor 510

Inhibitor 510 is a non-oxygen dependent in-can stabilizer for UV ink systems. It has high affinity to the radicals formed during storage and thus brings exceptional stability to the formula.

Bisphenol-A bis(diphenyl phosphate)

BDP is a heterocyclic phosphorus flame retardant, it has high thermal stability and resistance to oxidation, excellent water resistance. It is both reactive and additive flame retardant used in epoxy resin, PET, PEN, PBN and PU.

TEGO RAD 2700

TEGO RAD 2700 is suitable for inks, coating etc.

Solsperse 35000 Lubrizol

Solsperse™ 35000 is a 100% active polymeric dispersant which will improve dispersion and stability of organic transparent pigments and carbon black in liquid organic media.

进口可见光/红外吸收染料(Visible light/IR Absorption dye import)

Ketjenblack EC-300J

KETJENBLACK is a unique electro-conductive carbon black that has received favorable evaluations for its superior performance and stability of quality. Mixed with plastic, rubber or other materials, KETJENBLACK has garnered high marks for providing the same level of electro-conductivity with a lower loading quantity as conventional carbon black.

Photochromic dye

Photochromic Dyes are reversible raw dyes in crystalline powder form. Photochromic dyes reversibly change color upon exposure to ultraviolet light in the range of 300 to 360 nanometers. Full color change occurs in just seconds when using a flash gun to 20-60 seconds in the sunlight. The dyes change back to colorless when removed from the UV light source. Some colors may take longer to fade back to completely clear than others. Photochromic dyes are compatible with one another and can be mixed together to produce a wider range of colors.

Thermochromic dye/pigment

Thermochromic Pigments are thermochromic micro capsules in a powder pigment form. They have been specially designed for use in non aqueous based ink systems although their use is not limited to this. They can be used to formulate non aqueous based flexographic, UV, Screen, Offset, Gravure and Epoxy Ink formulations (for aqueous applications we would recommend using Thermochromic slurries).

Nucleating agent NA-50

NA-50 is a nucleation-transpare agent that can be used in polyolefins, such as polypropylene (PP) esters (PEF; Polyethylene Terephthalate), polyethylene terephthalate (PBT) PLA (PLA; Polylactic Acid) and polyamide (PA; Polyamides).

Nucleating agent(NA-11)

NA11 is the second generation of nucleation agent for crystallization of polymers as metal salt of cyclic organo phosphoric ester type chemical.This product can improve mechanical and thermal properties.

Nucleating agent 3940

NA-3940 is the second generation of sorbitol nucleating transparent agent and the polyolefin nucleating transparent agent largely produced and consumed in the current world. Compared with all the other nucleating transparent agents, it is the most ideal one that can give the plastic products superior transparency, luster and other mechanical properties.

Nucleating agent 3988

Nucleating transparent agent 3988 promotes the resin to crystallize by providing crystal nucleus and makes the structure of the crystal grain fine, thus improving the products’ rigidity, heat distortion temperature, dimension stability, transparency and luster.

CTP IR dyes

CTP IR 813, CTP IR 775, 134127-48-3/205744-92-9, Materials Chemistry, Near Infrared Absorption Materials

fluorescent red 300

Red Color Fluorescent Pigment Powder - High Fluorescent Red Dye for Greenhouse Film CAS 123174-58-3

Perylene Red 620

Perylene Red 620，Fluorescent dye,High Performing Fluorescent dyes Excellent weatherfastness High heat stability Extremely high chroma

Perylene Orange 240

Perylene Orange 240，Fluorescent dye